DIY // V-Day Double Stud Earrings

Valentine's Day Double Stud Earrings
Image Courtesy by SmithyJewelry
Model: April L.
Photography April L. | Model: April L.| Jewelry designer SmithyJewelry

What You’ll Need:

  • Needle Nose Pliers
  • Round Nose Pliers
  • Nippers
  • Length of Chain x4
  • Earring Studs with Loop x4
  • Jump Rings x4
  • Earring Backings x4
  • Charms x2 (optional)
TOOLS YOU NEED FOR THIS PROJECT
TOOLS YOU NEED FOR THIS PROJECT

Step 1. Prep

This tutorial is quick and easy and is a super cute way to show off double pierced ears! Begin by cutting four lengths of chain using your nippers. Cut two lengths measuring 2 inches and two lengths measuring 2 1/2 inches. I chose the black and gold chain for maximum matchability, but you can use any style or color chain you like.

Step 1 - Cut
Step 1 – Begin by cutting four lengths of chain

Step 2. Assemble

Once you have all your materials laid out, open a jump ring and slip on one of each: a post, a longer chain, a shorter chain, and an optional charm. I was feeling festive, so I added some cute vintage heart charms for Valentine’s Day. Close your jump ring securely using your needle nose and round nose pliers. Repeat this step for the second post on this earring, Then continue on to the second earring. Make sure to keep your chains from getting tangled during this process.

Tip:

Carefully bend the jump ring open to one side, then the other, until the two ends are as close together as possible. You should hear a “click” sound when the ring’s opening is so close that the two sides are flush together. This will give you a nice secure closure.

Step 2. Assembling your earring
Step 2. Assembling your earring
Assembling your earring
Assembling your earring Part II

Step 3. Put it On!

Your earrings are finished except for one last detail, wearing them. Put in each earring from front to back, to avoid tangling, and attach them snug to your lobes with backings. Now you have some lovely simple chain earrings for any occasion you like!

Valentine's Day Double Stud Earrings
Valentine’s Day Double Stud Earrings
Image Courtesy by SmithyJewelry
Image Courtesy by SmithyJewelry

Note:

This design is intended for those with two ear piercings, however, cuffs or screw back earring studs will still work just fine.

I hope you enjoyed reading my tutorial as much as I enjoyed writing it. Have a wonderful day and keep crafting!

Similar Posts

2 Comments

  1. I was designing earrings of the same type when I read this post. I have a box chain gold necklace and gold studs.
    Your design helps me have confidence mine will work out. Thanks.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.