DIY // Toy Chest with Seating

Final Toy Chest by OhEverythingHandmade
Final Toy Chest by OhEverythingHandmade

This Toy Chest with Seating was inspired by the mess my little ones would make during playtime. Jasmine is a collector of EVERYTHING colorful and fun to play with. Well, what can I tell you the house is overflowing with toys and we can’t start taking stuff to Goodwill because little baby brother is still using most of them.

Toy Chest with Seating Tutorial

Something had to be done, and a toy chest seemed to be just the right thing to make her. She has a low window in her room, a toy chest with seating is going to be functional and practical since she will be able to use it for seating and storage for a long time to come!

Here we go…

Boards you need
Boards you need

What you need for the base:

  1. One 1’x8′ pine board, cut two 30″ inch pieces and use the remaining boards for your sides and to secure your corners.
  2. You also need one 29×14″ board with a thickness of 1/2″ inch, this is for the bottom.
  3. To secure the corners I cut four 1.5×12″ inch boards from my sideboards.
  4. Furniture screws and a driller are required to continue!

Toy Chest by OhEverythingHandmade2

Instruction:

Step 1. Attach two 1.5×12″ boards to your 30″ inch board(s), with a 1/2″ gap to the edge. This is to secure your boards.

Toy Chest by OhEverythingHandmade3

Step 2. I used furniture screws on the outside but made sure all the holes were pre-drilled in order to avoid cracking.

Toy Chest by OhEverythingHandmade6

Step 3. Once the base was assembled, I attached the bottom board to the base. (the board can be secured with gorilla glue for a longer-lasting hold)

Toy Chest by OhEverythingHandmade4

Toy Chest by OhEverythingHandmade7

Step 4. To assemble the four legs I used the screws that came in the package.

Leg assembly
Leg assembly

Step 5. I placed the metal plate at each corner and marked where my screws would go. The center had to be drilled a little to make the legs fit better.

Toy Chest by OhEverythingHandmade9

Toy Chest by OhEverythingHandmade10

Step 6. After I attached the metal plate, I then screwed the leg knobs on.Toy Chest by OhEverythingHandmade11 Toy Chest by OhEverythingHandmade12

 

 

 

 

 

 

 

 

 

 

 

 

With all legs on, we can now start sanding down any rough edges, and remove splinters or fill in cracks with wood filler.


Toy Chest by OhEverythingHandmade13

Toy Chest by OhEverythingHandmade29

Instructions for the top:

You need >>>

  1. One 2×6 Pine board cut in two 30″ inch pieces and two 2×14″ inch pieces.
  2. Two 1×14″ inch boards for support
  3. More furniture screws

Toy Chest by OhEverythingHandmade14

Toy Chest by OhEverythingHandmade15

Step 1. Assembling just like the image above with Gorilla glue and screws will make a sturdy box that won’t hurt your little ones. 

Toy Chest by OhEverythingHandmade16

Step 2. Adding webbing to the top and securing it with staples, makes a great seating option that is soft and comfortable. (make sure your support board is on the bottom)

Toy Chest by OhEverythingHandmade17

Toy Chest by OhEverythingHandmade18

Toy Chest by OhEverythingHandmade19

Step 3. Then I applied batting to your top and secure everything with staples.

Toy Chest by OhEverythingHandmade20

Step 4. I used an old cover that we didn’t need anymore, by folding and cutting it, I accomplished the feel and look I wanted.

Toy Chest by OhEverythingHandmade21

Step 5. My next step was to layout the fabric that was going on top. Jasmine chose a very comfortable and soft pink (good choice)

Toy Chest by OhEverythingHandmade22

Step 6. Using an upholstery tack strip made this job so much easier.

Toy Chest by OhEverythingHandmade23

next step, adding nailhead trim!

Toy Chest by OhEverythingHandmade24

Step 7. I decided to use nailhead trim on her chest top so the cushion won’t move during the time she is using the chest. This is not necessary if you are going to use foam.

Toy Chest by OhEverythingHandmade26

Step 8. Adding a dust cover was important to me because I like to cover up all the staples that are still visible.

Toy Chest by OhEverythingHandmade25

Time to give her toy chest a coat of paint!

Toy Chest by OhEverythingHandmade28

Look at her! She loves the new “treasure chest” as she called it once I showed it to her.

I applied 2 coats of Ultra Pure White Satin Enamel Interior Paint to the outside of the base, and let it dry for 24 hours!

After a couple of days, I finally decided on what to add to the chest, I had thought about to let her paint it – in any way she would have liked, or to add our handprints to it, but my finalist was a floral design with a ribbon and her name on it.

Toy Chest Graphic Design

With the design printed on two 8.5×11 paper, I had to find a way to transfer the design onto the chest… Newspaper!!!! Yep, newspaper it is. Remember that every time you read a newspaper your hands get a little dirty or chalky like!

I was perfect, it worked like a charm. I added a piece of newspaper (use a piece that has lots of dark ink on it) underneath my design and taped it to my chest.

Toy Chest by OhEverythingHandmade30

Call it a light-bulb moment!

Toy Chest by OhEverythingHandmade31

Trace the design…

Toy Chest by OhEverythingHandmade32

Time to incorporate some color, to bring the design to life.

Toy Chest by OhEverythingHandmade33

Seal it with a clear spray, and let it dry!

Toy Chest by OhEverythingHandmade34

Lastly, all that’s left is to finally attach the hinges, and you’re DONE!

One quick note so your kiddos won’t hurt their fingers when closing the chest, I would recommend hydraulic hinges that buffer the closure. So because my chest lid was very heavy, the kids were not able to open it, so I didn’t add any hinges.

Toy Chest by OhEverythingHandmade36

Toy Chest by OhEverythingHandmade35

I hope you enjoyed the tutorial and will make your own version of this toy chest. And to make it easier for the design part, I got you the graphic right here to download and customize it with your own name.

Download Toy Chest Graphic

Floral design page 1

Floral design page 2

Similar Posts

9 Comments

    1. Alison, if you use wood instead of the webbing the top might be too heavy. But, it’s possible just make sure it’s at least 1/2″ plywood you sub with, so kids and adults can still sit on it.

      1. OKay, thanks. Also, it would be really helpful if you had a complete list of everything people need for this. Your lists are very incomplete, so I have had to go back to the store over and over to get more things that weren’t listed but then are needed in the directions.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.